Image sensor: Sony 4K EXMOR, crystal clear in any lighting
Frame rates: (16:9) 4K 30fps; 1920 x 1080, 1600 x 900, 1280 x 720, 960 x 540, 848 x 480, 800 x 448, 640 x 360, at 60, 30, 15fps; (4:3) 1280 x 960, 800 x 600, 640 x 480 at 60, 30, 15fps
24*X Zoom: 12X optical; 2X digital zoom
Wide field of view: DFOV 85°; HFOV 76°; VFOV 46°
Lens focal length: 3.9mm (wide) ~ 47.3mm (tele)
Lens F#: 1.8 (wide) ~ 2.8 (tele)
AE, white balance: auto, manual override via PTZApp 2
Minimum focus distance: 1.5m
Motorized Pan & tilt: Pan: ±170°;Tilt: +90° (up) -30° (down)
Preset number: 10 via IR remote, 128 via RS232
Secondary fixed lens (AI lens)
Image sensor: Sony 4K EXMOR
Frame rates and resolution set according to PTZ lens settings
Wide field of view: DFOV 95°; HFOV 78°; VFOV 50°
*Please use PTZApp 2 to set up 24X zoom *Please don' t put the CAM550 on the table. This will block the view of AI lens and the AI detection function will malfunction. The suggested installation height is 1.5m away from the floor.
USB
3.1 Gen 1, backward compatible with USB 2.0
UVC 1.1 (USB video), UVC1.5*
*UVC1.5 utilizes a different platform environment and requires a FW upgrade. Please contact technical support for more details.
Power Supply
Camera
AC 100V–240V, 50/60 Hz; Consumption: 12V, 2A
PoE+: 802.3at
Speakerphone
AC 100V to 240V, 50/60 Hz
Consumption: 12V, 5A
Speakerphone (FONE540)
Wireless Bluetooth / USB Wired for PC
Full duplex microphone array speakerphone
Two omnidirectional microphones support 360° pickup
Full duplex echo cancellation
Advanced noise suppression
Powerful wideband voice processing
Speaker volume: adjustable to 90 dB SPL at 0.5 m
3.5 mm line-in (aux) cable connects BYOD smartphones or PCs to use as speakerphones
Touch controls for volume adjustment, mute, phone input, call, and hang up
Can bridge phone-in and USB into one call
Kensington lock
HDMI & PoE
HDMI 1.3: 1080p 30fps/ 60fps
PoE+: 802.3at
Video Format
YUV, YUY2, MJPEG
Network video compression format: H.264, H.265
Network protocol: RTSP, RTMP
Control
Camera
IR remote control
VISCA/pelco P/pelco D via RS232 (128 preset points via
VISCA command)
Remote side: VISCA over IP, IP (RJ45)
UVC plug and play
WebUI: Browser IP access via Chrome (Not support IE)
OSD setting: HDMI out to TV monitor
PTZApp 2 Support
Speakerphone
UAC, plug and play
WebUI: Browser IP access via Chrome (Not support IE)
PTZApp 2 Support
Connectivity
Camera
USB type-B 3.1 connector, backward compatible with USB 2.0
12V/2A DC jack power adapter
Mini DIN9 for RS232 in & out connection (VISCA control panel and camera daisy-chain)
IP (RJ45)
HDMI
Speakerphone
USB2.0 Micro USB connector
12V/5A DC jack power adapter
LAN for IP remote access
Expansion port (daisy-chain speakerphone or microphone)
